
Protect the wood before another Indiana winter takes it.
Untreated or under-maintained decks and fences don't fail gracefully in Indiana — freeze-thaw cycles open the wood grain and let moisture in fast. We pressure wash, brighten, and let wood dry properly before applying a penetrating stain or solid deck finish rated for foot traffic and weather exposure, restoring color and, more importantly, restoring the wood's ability to shed water.
Staining over dirty or under-dried wood is the single most common reason deck finishes fail early. We wash with a wood-safe cleaner, neutralize and brighten graying wood, and confirm proper moisture content before staining — not just paint the day after washing. Fences get the same treatment, whether it's a privacy fence, picket, or horizontal cedar design.
Stain worked into the grain, not left sitting on top
Wood that's protected and still looks like wood
No cost, no obligation. We'll walk your project in person and follow up with an itemized quote — every coat, every prep step, spelled out.
Get Your EstimateWe check for rot, loose boards, popped nails, and graying, and flag anything that needs carpentry attention before staining.
Wood-safe pressure washing removes dirt, mildew, and old failing stain, followed by a brightening treatment on grayed wood.
We confirm the wood has dried to proper moisture content, and hand-sand any rough or splintering areas.
Semi-transparent, solid, or clear finish applied by brush or sprayer with back-brushing for even penetration into the grain.
Deck & Fence Staining is available across every community we serve. Pick your area for local details.
Semi-transparent stains typically need refreshing every 2-3 years here, solid stains every 4-5, depending on sun exposure and foot traffic.
No — wood needs to dry to the right moisture content first, usually 24-72 hours depending on weather. We check before staining rather than guessing.
We coordinate minor board and rail replacement as part of the prep. Larger structural deck repairs get referred or quoted as a separate carpentry scope.
Semi-transparent shows the wood grain and needs more frequent refreshing; solid stain covers grain like thin paint and lasts longer, which matters more on older or repaired wood.
Call (317) 509-9873 and we'll walk your project with you — no obligation, no pressure.